Our CTO (Luke Cole) previously worked for Hemisphere GPS (orginally called BEELINE, and now bought out by AgJunction) as a "Robotics Engineer" implementing auto-guidance solutions for various quadbikes and agriculture tractors that was used by 100's of vehicles around the world.

For 10 years, starting as a teenager in 1998 - Luke Cole has also worked for leading research institutes and companies such as NICTA (now called CSIRO Data61), CSIRO, Seeing Machines and ANU Robotics System Lab (lead by Alex Zelinsky, who received a rare prestigious AO award in 2017 and was Defence Scientist of Australia from 2012 for 6 years). Luke's worked included various autonomous mobile robot projects, involving computer vision, and even a self-driving car early 2000's. Back then OpenCV and ROS didn't exist, so we did a "roll-your-own" called VisLib and DROS comprised of 364,578 lines of code.

Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).

We have a long-standing robotics experience - our engineers offering Robotics Prototyping for Middle Falbrook, robot development and robotics custom software services have something like a combined 50 years worth of experience in the robotics field, from teleoperated and semi-autonomous mobile robotic applications, to custom software and/or custom hardware for general automation solutions, signal processing and control systems. Our knowledge base started in NSW and ACT, but now we primarily service East Coast Queensland.

We have developed autonomous mobile robots for air, underwater and ground. Our professional experience started with developing various control and sensor systems for small underwater vehicles in the late 1990's. We where fortunate enough to have been involved in one of the first self-driving car R&D projects back in early 2000's using a 4WD (to support computers for the large processing requirements). For an overseas client we developed a low profile (70mm high) semi-autonomous mobile robot platform for manikin/dummy mounting to simulate people moving (for vehicle crash safety and collision development by German R&D car manufactures). We have been fortunate enough to have been invited to the bulk of the German R&D car manufactures where they develop and test self-driving and driver assist development systems. We have developed various solutions for 2cm accuracy precision steering-guidance solutions for various types of Agriculture tractors (via the CAN bus and ad-hoc methods), which are still used by 1000's of tractors all over the world. We have retro fitted Quadbikes to allow semi-autonomous control via GPS way points. We have custom developed various indoor mobile robotics for indoor localistion and SLAM R&D purposes.

Robot navigation is the task where an autonomous robot moves safely from one location to another. This involves three primary questions:

  1. “Where am I?” which is known as robotic localisation (hard).
  2. “Where am I going?” which is known as goal recognition (typically provided by a human).
  3. “How do I get there without collisions?” - path planning (easy) and obstacle avoidance (hard).

For robotic localisation and obstacle avoidance we use sensors to solve the problem. To move along the planned path, we use control systems.

We have a deep understanding of signal processing and sensors of various types. We appreciate sensing is a hard problem. There is no one-size-fits all solution. Odemetry (wheel encoders) provide a cost-effective method to measure relative position. however suffer from wheel slip and errors are accumlate over time. GPS only works outdoors, effected by trees/buildings, and without a nearby basestation (for expensive DGPS/RTK) the absolute position error is several meters. IMU (accelerometers + gyros + Magnetometer) suffer from drift errors and noise error causing ``random walk'' when integrated. Magnetometer are effected by magnets, are slow to respond and measure magnetic north (not true north). Infrared are cost-effective, but short range and saturated by sunlight. Ultrasonic range sensors are cost-effective and good for detecting large objects, but can't detect glass/water, only measure a few metres, have a wide beam and provide medium accuracy. RADAR uses radio (instead of sound) to detect objects at long distance, but are relative more expensive then ultrasonic range sensors. Image sensors (video cameras) are a cost-effective, rich in information, and two or more can get depth information, but are computationally expensive, hard to process the data (aka computer vision), affected by dust/fog/rain, and light variations. LIDAR are high accuracy (about 1mm), however are expensive (prices are coming down every year), but can't detect glass/water. Distance measurement sensors are easy to interpret, other sensors are hard. Colour constancy and object classification is very hard (e.g. “Is it a tree or a human?”).

We have a deep understanding of control systems. We typically use Linux-based SBC's and a program a custom PID controller - perhaps even a cascade PID controller, bayesian filters, particle filters, kalman filters, Monte Carlo methods, or train a deep neutral network. The outputs of these systems might control various types of motors (e.g. brushed, brushless, servo, steppers) and/or various types of actuators (e.g. linear, pneumatic, hydraulic), and/or other things like lights or speakers.

We have been involved with computer vision and machine vision since early 2000's - we where involved in the development of two computer vision libraries before OpenCV became popular. Have done much biologically inspired techniques such as optical flow. Was involved in the early days of artificial intelligence using techniques such as Local Binary Patterns (LBP) and Haar-like features (HAAR). These days we typically use machine learning methods such as designing and training deep neural networks (outstanding for vision-based object recognition using ImageNet).

We where involved in the development of a robotic operating system which had 364,578 lines of code, before ROS was written.

We have developed custom software for various manipulators, and have a good understanding of forward and inverse kinematics.

We appreciate that challenges with robotics - particularly with robot navigation, computer/machine vision, and manipulation with the real-world, in real-time using real-robots.

Whilw we can custom develop robot navigation solutions. We can fast-track robot navigation solutions for ground, air and water based platforms via off-the-shelf autopilots. There are many about these days. Some cost-effective open-source options include Pixhawk 4, PX4, and ArduPilot. Some expensive closed-source options include Auterion Skynode, Tersus AutoSteer, Embention Veronte, Outback eDriveX and Trimble EZ Pilot.

We are confident with a broad range of skills and confident our Robotics Prototyping for Middle Falbrook services can offer solutions such as:

These technologies can be used for various applications such as:

We also offer a R&D robotic platform UGV for hire to help rapid development of robotics systems. If you'd like to know more please visit "Scotty Robot".

Some of our Robotics Prototyping for Middle Falbrook and Custom Development Experience

Information About Middle Falbrook

Empowering Businesses in Middle Falbrook, Upper Hunter Valley and Beyond: COLETEK's Commitment to the Local Community

In the heart of the picturesque Upper Hunter Valley, where rolling hills meet thriving business communities, COLETEK is proud to call Middle Falbrook home. As a trusted Australian company with extensive experience, our roots run deep in this region, and our dedication to supporting local businesses is unwavering.

With a national reach that spans the country, we've built a reputation for delivering innovative solutions and unparalleled customer service. However, our commitment to Middle Falbrook and the Upper Hunter Valley goes beyond mere business transactions – it's about being an integral part of this community, understanding its unique needs, and working tirelessly to empower local entrepreneurs.

At COLETEK, we take pride in our local presence, knowing that effective partnerships can only be forged through genuine connections. Our team is comprised of experts who've lived and breathed this area for years, ensuring that we fully comprehend the intricacies of doing business in Middle Falbrook. This insight allows us to develop personalized strategies tailored to the needs of regional businesses.

We believe that trust is the foundation upon which strong relationships are built. That's why we're dedicated to being a reliable presence in the community, always available to offer guidance and support when needed. Our goal is to become an extension of your team, ensuring that you can focus on what matters most – growing your business.

As a local company with a national reputation, COLETEK is committed to driving innovation in the Upper Hunter Valley. We're passionate about identifying new opportunities for growth and improvement, and we work closely with our clients to develop targeted solutions that meet their specific needs.

If you're looking for a trusted partner that truly understands the unique challenges and opportunities of Middle Falbrook, Upper Hunter Valley, look no further than COLETEK. Contact us today and let's explore how we can help your business thrive in this vibrant region.

Contact Us

Robotics Prototyping for Middle Falbrook – Our Clients: Big Brands & Small Businesses


Robotics Prototyping for Middle Falbrook – Amazing Customer Testimonials

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

thumb

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.

thumb

We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.

thumb

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

thumb

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

thumb