Embedded Systems Development for Keinbah

Do you need help with an embedded system? Our team has been working with Embedded Systems since the early 1990s. During this time we have worked with microcontroller (MCU) and Micro-Processor Unit (MPU) and Digital Signal Processing (DSP), such as STM32F4, MSP430, Atmel, PIC, LPC and ARM. We are use to working with COTS devices such as OMAP, BeagleBone Black, Raspberry Pi and Arduino or in-house custom embedded systems. We have also had experience rolling our own real-time operating systems, however still prefer to use COTS such as RTLinux, VxWorks, RTOS and GreenHill. We also consider ourselves Linux experts due to our experience with the Linux kernel, filesystem and extensive knowledge and experience of Linux command line tools and packages. Using the embedded system to read sensors and/or control motors in real-time via various signal processing methods is a very common task for us.

So if you need a custom embedded system built from scatch, or just need further work on an existing embedded system, feel free to contact us. We have much experience designing circuits with MCU's, MPU's or DSP alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC). And when it comes to loading the operating system (possible real-time based) and writting the firware/software, we have that all covered too - programming is also one of our strengths.

Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.

Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.

Some of our Electronics Experience

The CTO of COLETEK (Luke Cole) originally worked for Hemisphere GPS as a "Robotics Engineer" implementing auto-guidance solutions for agriculture tractors and quadbikes.

Luke Cole also worked at Location Aware Technologies (433) developing indoor tracking devices. And also worked for leading research institutes such as NICTA, CSIRO and ANU Robotics System Lab (lead by Alex Zelinsky).

Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).

Serving Businesses in Keinbah, Lower Hunter Valley, New South Wales, Australia – Reliable Engineering & Product Development Solutions from COLETEK

As a business owner or decision-maker operating in the picturesque region of Keinbah, Lower Hunter Valley, New South Wales, Australia, you understand the importance of partnering with trusted experts who can deliver innovative engineering and product development solutions. For over 21 years, COLETEK has been a reliable partner for businesses across Keinbah, Lower Hunter Valley, New South Wales, Australia, providing multidisciplinary expertise that drives growth, enhances operations, and addresses specific challenges in the region. Established in 2001, COLETEK is a multidisciplinary Australian engineering and product development company with a national reputation for delivering high-quality solutions. Our team of experienced engineers, designers, and developers operate throughout Australia, including Keinbah, Lower Hunter Valley, New South Wales, Australia, to support businesses like yours. By leveraging our extensive knowledge and capabilities in Keinbah, Lower Hunter Valley, New South Wales, Australia, you can be confident that your project or initiative is in capable hands. At COLETEK, we understand the unique needs of businesses operating in the regional setting of Keinbah, Lower Hunter Valley, New South Wales, Australia. That's why our team takes a collaborative approach to engineering and product development projects, working closely with you to deliver custom-fit solutions that meet your specific goals and objectives. Our capabilities are broad, encompassing mechanical, electrical, software, and data-driven expertise, allowing us to tackle complex problems and drive business outcomes for Keinbah-based businesses and organizations. While we may not be based in Keinbah, Lower Hunter Valley, New South Wales, Australia itself, our extensive experience working with businesses across the region has given us a deep understanding of its challenges and opportunities. As such, you can trust that our solutions are tailored to meet your specific needs and contribute to the growth and prosperity of the local economy. If your business in Keinbah, Lower Hunter Valley, New South Wales, Australia requires innovative engineering and product development solutions, look no further than COLETEK. Our team is committed to delivering exceptional results that exceed expectations and drive long-term success for your organization. To learn more about how we can support you or schedule a consultation, Contact Us.

Embedded Systems Development for Keinbah – Our Clients: Big Brands & Small Businesses

Embedded Systems Development for Keinbah – Amazing Customer Testimonials

I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.

Jesse Bogaert
Northern Rivers, NSW, Australia

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.

Jarrod Stephens
Sydney, NSW, Australis

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

Astrid Van Ewyk
Sydney, NSW, Australia

We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.

Jan Kroupa
Safety Roof Anchors, Sydney, NSW, Australia

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

Oded Kuznik
IT Land, Tweed Coast, NSW, Australia

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

Alan Hay
Boylan Group, Sydney, NSW, Australia

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

Paul Faranda
EBC Enviro Bug Control, Northern Rivers, NSW, Australia

Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.

Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.

Robotics Services Links

Useful Links

Location

Head Office: Gold Coast, Australia
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia