Do you need help with an embedded system? Our team has been working with Embedded Systems since the early 1990s. During this time we have worked with microcontroller (MCU) and Micro-Processor Unit (MPU) and Digital Signal Processing (DSP), such as STM32F4, MSP430, Atmel, PIC, LPC and ARM. We are use to working with COTS devices such as OMAP, BeagleBone Black, Raspberry Pi and Arduino or in-house custom embedded systems. We have also had experience rolling our own real-time operating systems, however still prefer to use COTS such as RTLinux, VxWorks, RTOS and GreenHill. We also consider ourselves Linux experts due to our experience with the Linux kernel, filesystem and extensive knowledge and experience of Linux command line tools and packages. Using the embedded system to read sensors and/or control motors in real-time via various signal processing methods is a very common task for us.

So if you need a custom embedded system built from scatch, or just need further work on an existing embedded system, feel free to contact us. We have much experience designing circuits with MCU's, MPU's or DSP alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC). And when it comes to loading the operating system (possible real-time based) and writting the firware/software, we have that all covered too - programming is also one of our strengths.

Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.

Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.

Some of our Electronics Experience

The CTO of COLETEK (Luke Cole) originally worked for Hemisphere GPS as a "Robotics Engineer" implementing auto-guidance solutions for agriculture tractors and quadbikes.

Luke Cole also worked at Location Aware Technologies (433) developing indoor tracking devices. And also worked for leading research institutes such as NICTA, CSIRO and ANU Robotics System Lab (lead by Alex Zelinsky).

Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).


Solutions for Tilba Tilba and the South Coast - COLETEK's Local Expertise

As a multidisciplinary Australian engineering and product development company based in Tilba Tilba, South Coast, New South Wales, Australia, we're proud to serve businesses across this beautiful coastal region. Established in 2001, our national reputation is built on reliability, innovation, and trusted partnerships with local organizations. When it comes to supporting the businesses that make the South Coast thrive, COLETEK is a partner you can count on. Our team of experts is dedicated to collaboration and capable of tackling even the most complex challenges. Whether you're an established business or just starting out, we understand the unique needs of operating in Tilba Tilba and the surrounding areas. At COLETEK, we don't just provide solutions – we partner with our customers to drive innovation and growth. Our engineers and product developers have a deep understanding of what it takes to succeed on the South Coast, from the intricacies of local regulations to the nuances of Australia's dynamic markets. As a trusted engineering and product development company serving businesses across Tilba Tilba, South Coast, New South Wales, Australia, we're committed to delivering outstanding results that exceed our clients' expectations. By combining our expertise with your vision, we can help you overcome any obstacle and achieve your goals. So why choose COLETEK for your engineering and product development needs in Tilba Tilba and the surrounding areas? Our answer is simple: with over two decades of national experience, a team of experts, and a reputation built on reliability, innovation, and collaboration – we're the trusted partner you need to navigate the complexities of engineering and product development. If you're looking for a reliable partner that's passionate about delivering exceptional results, look no further. At COLETEK, we're dedicated to helping businesses across Tilba Tilba, South Coast, New South Wales, Australia thrive in today's fast-paced environment. Contact Us today to learn more about how our expertise can benefit your organization. Contact Us

Embedded Systems Development for Tilba Tilba – Our Clients: Big Brands & Small Businesses


Embedded Systems Development for Tilba Tilba – Amazing Customer Testimonials

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.