Do you need help with an embedded system? Our team has been working with Embedded Systems since the early 1990s. During this time we have worked with microcontroller (MCU) and Micro-Processor Unit (MPU) and Digital Signal Processing (DSP), such as STM32F4, MSP430, Atmel, PIC, LPC and ARM. We are use to working with COTS devices such as OMAP, BeagleBone Black, Raspberry Pi and Arduino or in-house custom embedded systems. We have also had experience rolling our own real-time operating systems, however still prefer to use COTS such as RTLinux, VxWorks, RTOS and GreenHill. We also consider ourselves Linux experts due to our experience with the Linux kernel, filesystem and extensive knowledge and experience of Linux command line tools and packages. Using the embedded system to read sensors and/or control motors in real-time via various signal processing methods is a very common task for us.
So if you need a custom embedded system built from scatch, or just need further work on an existing embedded system, feel free to contact us. We have much experience designing circuits with MCU's, MPU's or DSP alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC). And when it comes to loading the operating system (possible real-time based) and writting the firware/software, we have that all covered too - programming is also one of our strengths.
Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.
Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.
Some of our Electronics Experience
The CTO of COLETEK (Luke Cole) originally worked for Hemisphere GPS as a "Robotics Engineer" implementing auto-guidance solutions for agriculture tractors and quadbikes.
Luke Cole also worked at Location Aware Technologies (433) developing indoor tracking devices. And also worked for leading research institutes such as NICTA, CSIRO and ANU Robotics System Lab (lead by Alex Zelinsky).
Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).
Pioneering Engineering and Local Expertise for Blacksmiths, East Lake Maquarie, New South Wales, Australia Businesses
As a trusted engineering and product development company with a nation-wide footprint, COLETEK is committed to delivering innovative solutions that meet the diverse needs of businesses across Blacksmiths, East Lake Maquarie, New South Wales, Australia. Established in 2001, our multidisciplinary team has earned a reputation for reliability, collaboration, and capability – supporting local companies and national brands alike.
When it comes to product development, engineering consulting, or innovative problem-solving, COLETEK is the partner of choice for forward-thinking businesses across Blacksmiths, East Lake Maquarie, New South Wales, Australia. Our deep understanding of the region's unique challenges and opportunities allows us to provide tailored support that helps your business thrive in today's fast-paced environment.
As a company based in Blacksmiths, East Lake Maquarie, New South Wales, Australia, we are committed to fostering close ties with local businesses, government agencies, and community organizations. Our team is dedicated to listening carefully to your needs, working collaboratively with you to achieve shared goals, and delivering actionable solutions that drive tangible results.
In an ever-evolving business landscape, trust is a rare commodity. COLETEK has consistently demonstrated its commitment to the highest standards of engineering excellence, integrity, and customer satisfaction – why not experience the difference for yourself? Whether you're seeking innovative product development, complex engineering challenges, or trusted guidance on your next strategic move – we invite you to explore how our capabilities can support your journey towards success.
At COLETEK, we're proud of our reputation as a leading Australian engineering and product development company. We believe that every business in Blacksmiths, East Lake Maquarie, New South Wales, Australia deserves world-class expertise, whether they're just starting out or already an established leader. That's why we continue to invest in the latest technologies, tools, and training – ensuring our team is always equipped to meet the unique needs of local businesses like yours.
Ready to take your business to the next level with the right partner by your side? Look no further than COLETEK. Operating throughout Blacksmiths, East Lake Maquarie, New South Wales, Australia, and beyond – our team is here to help you overcome any obstacle, seize new opportunities, and drive long-term growth. Don't settle for anything less: contact us today to learn how COLETEK can be your trusted ally in these uncertain times. Contact Us
Embedded Systems Development for Blacksmiths – Our Clients: Big Brands & Small Businesses
Embedded Systems Development for Blacksmiths – Amazing Customer Testimonials
Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.
I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.
COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.
I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.
We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.
As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.
I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia