Embedded Systems Development for Millah Murrah

Do you need help with an embedded system? Our team has been working with Embedded Systems since the early 1990s. During this time we have worked with microcontroller (MCU) and Micro-Processor Unit (MPU) and Digital Signal Processing (DSP), such as STM32F4, MSP430, Atmel, PIC, LPC and ARM. We are use to working with COTS devices such as OMAP, BeagleBone Black, Raspberry Pi and Arduino or in-house custom embedded systems. We have also had experience rolling our own real-time operating systems, however still prefer to use COTS such as RTLinux, VxWorks, RTOS and GreenHill. We also consider ourselves Linux experts due to our experience with the Linux kernel, filesystem and extensive knowledge and experience of Linux command line tools and packages. Using the embedded system to read sensors and/or control motors in real-time via various signal processing methods is a very common task for us.

So if you need a custom embedded system built from scatch, or just need further work on an existing embedded system, feel free to contact us. We have much experience designing circuits with MCU's, MPU's or DSP alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC). And when it comes to loading the operating system (possible real-time based) and writting the firware/software, we have that all covered too - programming is also one of our strengths.

Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.

Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.

Some of our Electronics Experience

The CTO of COLETEK (Luke Cole) originally worked for Hemisphere GPS as a "Robotics Engineer" implementing auto-guidance solutions for agriculture tractors and quadbikes.

Luke Cole also worked at Location Aware Technologies (433) developing indoor tracking devices. And also worked for leading research institutes such as NICTA, CSIRO and ANU Robotics System Lab (lead by Alex Zelinsky).

Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).

Experience the COLETEK Difference in Millah Murrah, Central Tablelands, New South Wales, Australia

As a leading multidisciplinary engineering and product development company with over two decades of experience, we're proud to call ourselves a trusted partner for businesses like yours across Millah Murrah, Central Tablelands, New South Wales, Australia. Our commitment to reliability, collaboration, and capability has earned us a reputation as a go-to solution provider throughout the region. Established in 2001, COLETEK has had the privilege of supporting local businesses and entrepreneurs in our home ground, Millah Murrah, Central Tablelands, New South Wales, Australia, along with others across the country. Our team's extensive skills and collective expertise encompass a broad range of disciplines, allowing us to adapt to diverse industry needs and bring unique value to each partnership. What sets COLETEK apart is our unwavering focus on collaboration and trust-building. We believe that effective problem-solving relies on listening carefully to the concerns of our clients and working tirelessly to deliver tailored solutions that meet their specific needs. It's a formula that has yielded impressive results, as our satisfied customers in Millah Murrah, Central Tablelands, New South Wales, Australia, and beyond, can attest. Our capabilities extend far beyond any single product or service – they're rooted in the collective knowledge and expertise of our talented team. When you partner with COLETEK, you gain access to a wealth of experience accumulated from years of working together to overcome challenges and turn innovative ideas into reality. Whether your business is small or large, we understand the importance of reliability and have built our reputation on consistently delivering exceptional outcomes. As a company established in 2001, rooted in Millah Murrah, Central Tablelands, New South Wales, Australia, yet operating throughout the nation, we've earned a national reputation for trustworthiness and competence. With COLETEK on your side, you can rest assured that your project is in capable hands, free to focus on what matters most: your business's growth and success. If you're looking for a trusted partner to work closely with your team, share your vision, and bring innovative solutions to life, look no further. Let us demonstrate our capabilities firsthand by reaching out today. Contact Us here.

Embedded Systems Development for Millah Murrah – Our Clients: Big Brands & Small Businesses

Embedded Systems Development for Millah Murrah – Amazing Customer Testimonials

I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.

Jesse Bogaert
Northern Rivers, NSW, Australia

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

Paul Faranda
EBC Enviro Bug Control, Northern Rivers, NSW, Australia

We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.

Jan Kroupa
Safety Roof Anchors, Sydney, NSW, Australia

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

Oded Kuznik
IT Land, Tweed Coast, NSW, Australia

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

Astrid Van Ewyk
Sydney, NSW, Australia

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.

Jarrod Stephens
Sydney, NSW, Australis

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

Alan Hay
Boylan Group, Sydney, NSW, Australia

Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.

Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.

Robotics Services Links

Useful Links

Location

Head Office: Gold Coast, Australia
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia