Do you need help with an embedded system? Our team has been working with Embedded Systems since the early 1990s. During this time we have worked with microcontroller (MCU) and Micro-Processor Unit (MPU) and Digital Signal Processing (DSP), such as STM32F4, MSP430, Atmel, PIC, LPC and ARM. We are use to working with COTS devices such as OMAP, BeagleBone Black, Raspberry Pi and Arduino or in-house custom embedded systems. We have also had experience rolling our own real-time operating systems, however still prefer to use COTS such as RTLinux, VxWorks, RTOS and GreenHill. We also consider ourselves Linux experts due to our experience with the Linux kernel, filesystem and extensive knowledge and experience of Linux command line tools and packages. Using the embedded system to read sensors and/or control motors in real-time via various signal processing methods is a very common task for us.
So if you need a custom embedded system built from scatch, or just need further work on an existing embedded system, feel free to contact us. We have much experience designing circuits with MCU's, MPU's or DSP alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC). And when it comes to loading the operating system (possible real-time based) and writting the firware/software, we have that all covered too - programming is also one of our strengths.
Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.
Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.
Some of our Electronics Experience
The CTO of COLETEK (Luke Cole) originally worked for Hemisphere GPS as a "Robotics Engineer" implementing auto-guidance solutions for agriculture tractors and quadbikes.
Luke Cole also worked at Location Aware Technologies (433) developing indoor tracking devices. And also worked for leading research institutes such as NICTA, CSIRO and ANU Robotics System Lab (lead by Alex Zelinsky).
Lance Cole has also worked at NICTA and has a background of various hardware development, such as working for a contract company to the US millary (EOS), building the Common Remotely Operated Weapon Station (CROWS).
Serving businesses across Lidsdale, New South Wales, Australia with trusted engineering expertise
Let’s build something remarkable together.
Contact UsEmbedded Systems Development for Lidsdale – Our Clients: Big Brands & Small Businesses
Embedded Systems Development for Lidsdale – Amazing Customer Testimonials
My hard drive died with 18 months of work plus photos of my daughters 1st 18 months of life. I contemplated building a time machine to go back and document all those memories again - though I found it logistically and financially much easier to go with COLETEK. My recommendation is forget trying to build a time machine - call COLETEK.
I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.
My hard drive died with 18 months of work plus photos of my daughters 1st 18 months of life. I contemplated building a time machine to go back and document all those memories again - though I found it logistically and financially much easier to go with COLETEK. My recommendation is forget trying to build a time machine - call COLETEK.
I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia